Most modern smart card machines run on Android, the same operating system as many phones which means the same manual network selection menu is usually there too. If your card machine has weak or unreliable signal, you can turn off automatic network selection, see every network available at your location, and manually pick whichever one is strongest.
Step 1: Open Settings on your card machine
Find the Settings app on your terminal, the same gear/cog icon you'd see on an Android phone. On some terminals this is accessed by swiping down from the top of the screen, on others there's a dedicated Settings icon on the home screen.
Step 2: Go to mobile network settings
Tap Network & Internet (sometimes labelled Connections), then Mobile Network or SIM & Network. The exact wording varies slightly by manufacturer, but it's always somewhere under the main network settings.
Step 3: Open Advanced
Tap Advanced to expand the additional mobile network options (on some devices this is labelled Network Operators instead).
Step 4: Turn off "Automatically select network"
Find the toggle for Automatically select network (or Select automatically) and switch it off. You may see a warning that manual selection can affect service that's expected, tap through to confirm.
Step 5: Wait for the available networks to appear
The terminal will scan for every network it can see at your location. This can take up to a minute, so give it time rather than backing out of the screen.
Step 6: Try each network to find the strongest
Select a network from the list and check the signal strength indicator at the top of the screen, then back into the list and try the next one. Repeat until you've tested each available network, and leave the terminal connected to whichever gave the strongest, most consistent signal.
Worth knowing: Once you've manually selected a network, the terminal will stay on it even if that network has an outage, rather than automatically failing over to another one. If you start getting no signal after manually selecting, it's worth switching back to "Automatically select network" or trying a different network from the list.
If you can't find these settings
Some providers lock down their terminals so merchants can't access general Android settings, or hide them behind a technician PIN for security reasons. If Settings isn't accessible, or you don't see a mobile network option, contact your provider's support line they can usually check or change the connected network remotely.
Still no good signal on any network?
If every network tests weak, the issue is more likely your location than your settings try moving the terminal near a window or away from thick walls, metal shelving or large appliances, and restart it fully off, wait 10 seconds, back on. Check too whether your terminal supports WiFi as a backup connection. If coverage is consistently poor at your premises regardless of network, see LowerFees' range of card machines or talk to our team about a terminal with better multi-network or WiFi failover for your location.
Note: Exact menu names and steps vary slightly by terminal manufacturer and Android version this page is a general guide, correct to the best of our knowledge as of September 2026. If your specific terminal looks different, the same options are usually there under a similarly named menu.